Tag: Adjustable actuator

How does a DC24V switching actuator work?

How does a DC24V switching actuator (electric valve) work? When you install a DCL 24V switching type electric valve on your pipeline, you can pass [...]

How does the AC220V switching actuator work?

How does a switching actuator (electric valve) work? When you install a DCL switching type electric valve on your pipeline, you can control the valve all the way through a relay, switch [...]

Other technical advice

Service & Support Other Technical Inquiries service@dcl-controls.com Tel (+86) 130 2633 [...]

How do I calibrate (align) the input signal of an actuator?

When there is a deviation between the valve position positioned by the actuator and the input signal when 4~20mA is input (at this time, there is also a deviation between the feedback signal and the input signal), you can [...]

Common faults and troubleshooting of adjustable actuators

This guide applies to DCL explosion-proof series/ordinary series/quick-open series regulated actuators, the models are as follows: Ordinary series: DCL-05E/DCL-1 [...].

How to set the regulated motorized valve?

Mounting the actuator to the valve body Adjusting the fully closed mechanical limit Adjusting the fully open mechanical limit Servo controller panel description Setting Operation Output current correction Troubleshooting [...]

How do I set the deadband of an actuator?

By setting the deadband, the actuator can be made to better match the application scenario of PID closed loop control. How to set the deadband of the actuator? There are only 2 steps required: 1. Place the [...]